Cs Ineecasevasnavterwdes - Panasonic SC-AK44 Operating Instructions Manual

Listening to compact discs
Program play
by remote control only
You can program up to 24 tracks.
Press [CD].
Ensure CD is stopped.
Press [PROGRAM].
Press [DISC].
(within 10 seconds or so)
nf GADA Press [1] — [5] to select the disc you want.
LE
[e -am ammm e e e a a e ag aa rn rey
Press the numeric button to select the desired track.
Repeat steps EJ through until you have pro-
grammed all the tracks you want.
Press [>/A].
Play will start in the programmed sequence.
Aa. a?
[PRGN] |
À oo goon &
Press [PROGRAM] in the stop mode.
Programmed contents will be saved in memory.
Pressing [M/ CLEAR] will cancel program play, but it will also erase
the entire program.
To select a two-digit track
Press [210] and then the two numbers you want.
E] When "CD FULL" appears
The number of programmed tracks is limited to 24. No further
tracks can be programmed.
Com disc oper P|
El You can do the following during program mode
è Check program contents.
Press [kedd] or [>> m].
Every time you press one of the buttons, the track and program
No. are shown on the display.
® Add to the program.
Repeat steps EJ through Ef.
e Cancel entries.
From the fast Press [CANCEL].
programmed track
A specified track Select the track with [@</<@@] or
only [> API], and press [CANCEL] within
3 seconds.
All tracks Press [MI/CLEAR].
Memory retention
Your program is retained in memory for about 2 weeks while the
system is unplugged.
Specified track number
Program order
To replay your program
If you tumed OFF your program with [PROGRAM], you can play it
again as explained below.
1. Press [PROGRAM].
2. Press [>/A].
If you program a track not on your CDs
— — The track is initially programmed, but during program play, the player
Indicates i will skip that track and will continue playing from the next programmed
program mode item.
7 Tt CA) aks
£] CD (Fl
E TIR ERRA r e e. E A B a È A E E A AO T g
ee et ra ee OO A N |
RQTS621