Panasonic SC-HT790V Operating Instructions Manual page 58

Recording
Timer recording doesn't record a
program correctly.
Black bands appear in the
recording.
Listening to the radio
Cannot select the tuner
Unit display
aCheck the clock and calendar
• Set the channel and start and end times correctly•
eBe sure to press [/,,] after programming to put the unit in timer recording standby
oProgram times may be overlapped.
• Check and see if the subwoofer's AC power supply cord _s connected.
38
14
47".;
The tape counter isn't changing.
"No DISC"
"Ul1"
"HOE]", "FOe"
OE] stands for a number.
from the VCR MENU ,Sel_
• The tape counter does not change while playing unrecorded parts.
J_J L_ L--]
• The display also appears like this if the tape is dirty or damaged. Consult your dealer if thi.,
is the case.
_ _ d_co the, unit cannot _la_ nse_ one it can.
ablank DV_ , ' ,-_
• You haven't inserted a disc; insert one.
You haven t inserted the d sc correctly nsert nt correc ly.
• Check and correct the speakei_ oord con.n_ns;
, :_If _=s does not fix the problem;:tbeted_ _PO_We_, Supply problem Consu t the dealer; :
• Disc is dirty. Wipe it clean.
• l_,n_0__ 0_eration psrformed_ _R_ons and t_/aga n _'<_'_*
• Trouble may have occurred. The number following "H" or "P depends on the status of the
unit.
Reset procedure:
Press [_)] to switch the unit to the standby mode and then back to ON.
Alternatively, press [(_)] to switch the unit to the standby mode, disconnect both AC power
supply cords, and then reconnect.
• If the service numbers fail to clear, note the service number and contact a qualified service
person.
Television display
p xx_ picture
No on-screen display.
On-Screen Menu Icons not
displayed or only partially
displayed on the television.
The menu is displayed in a
different language.
eY0u are trying to display incompatib e p ctures
eGo to Display in the SETUP menus, and select "On" for "On-Screen Messages".
eGo to OPTION in the VCR MENU, and select "ON" for "OSD"
==Press [A, _] while the rightmost Icon is highlighted to move them down.
eGo to Disc in the SETUP menus, and select the preferred language for "Menus".
eGo to LANGUAGE in the VCR MENU, and select the preferred language for menus.
i
18
11 14
6
31 I
44 ]
31 I
42 _1
ROT6951