Panasonic SC-HT790V Operating Instructions Manual page 36

-- FM/AM
W/VIDEO
1,
5
2 4 5
7 •
STOP
• Tape speeds
There are three tape speeds.
SP: You can record the length shown on the tape.
EP: Three times the length o1SP mode.
VP: Five times the length of SP mode.
oYou cannot play tapes recorded with VP mode on other equipment.
• It takes more time for automatic tracking to work when playing
tapes recorded with VP mode, and it may not work at all with some
tapes. Do tracking manually if this is the case ("* page 35).
• This unit can play tapes recorded with LP mode on other
equipment ("LP" lights on the display).
Preparation
Turn on the television and select the video input for the VCR.
1
2
3
4
5
6
Press [VCR] to put the remote control
in VCR mode.
Press [(_] to turn on the unit.
Press [DVD/VCR] to select "VCR" as
the source.
Insert the tape you want to record to.
Ensure its tab is in place (-* page 5).
Select the channel with the numbered
buttons or [& OH^], [_' CHv].
• To select with the numbered buttons:
e.g. channel 2: [g] -, [2]
channel 23: [2] ,= [3]
channel 123: [100] =* [2] =_ [3]
Press [SPEED] to select the tape
speed.
Each time you press the button:
SP-*EP_.VP
t J
7
While pressing [VCR], press [O REC]
to start recording.
"REC" lights on the unit's display.
To stop recording
Press [11].
To pause recording
Press [I I].
Press it again or while pressing [VCR], press [0 REC] to continue
recording.
• To specify a time to stop recording (-, page 48,
The sleep timer)
• You cannot change channels while recording. You can change
channels while paused.
• The unit will automatically return to the stop mode after a pause of
5 minutes while recording.
• Even if the tape you use is labeled "S-VHS", the recordings you
make do not use this system.
• You cannot record from the disc section to the VCR.
RQT6951
im