Panasonic SC-HT790V Operating Instructions Manual page 44

i
ROT6951
im
VCR
I0
While the VCR MENU is displayed
1
Press [A, T] to select the "OPTION"
and press [ENTER].
2
Press [A, Y] to select the item and
press [<1, I_] to change the setting.
OSD oOfl OFF
To exit the settings screen
Press [MENU] until the screen disappears.
Items Settings (Underlined items are the factory preset.)
OSD (-' page 45, On-screen display) OJ_!: Messages appear on the television for about five seconds
after you perform operations.
OFF: Messages do not appear,
TAPE SELECT _J2.D: T30, T60, T90, T120 tapes
Set the length of tape you are using so the unit can show the correct T160: T140, T 160 tapes
remaining time. T180: T180 tapes
BLUE BACK O_J: The screen shows a blue background when you play
unrecorded portions.
OFF
JET NAVIGATOR (-, page 40) ON: Jet Navigator data automatically registered.
OJ_E: Data not registered.
DELETE NAVIDATA _LO
Delete all the Navigation data registered in the unit. YES: Then press [ENTER] when you want to delete aJIthe Jet
See page 40 to delete data on a single tape. navigator data.
JET SEARCH ('* page 34) × 27 x;_5
Set the speed for JET SEARCH when playing EP and VP tapes. Select x 27 if the picture is poor at x 35.
MTS (-, page 45, Changing audio) t_N: To receive stereo broadcasts.
Set the MTS (Multi-channel Television Sound Stereo) reception SAP: To receive SAP when being broadcast.
type, MONO: To receive monaural broadcasts (e.g., when reception is
poor).
DISPLAY BRIGHT: The display is bright all the time.
Set the brightness of the unit's display when the unit is in standby _: The display dims when the unit is in standby mode.
mode. OFF: The display turns off when the unit is in standby mode.