Panasonic SC-HT790V Operating Instructions Manual page 25

DVD
bu_ons
• Y4 •
ENTER
You can select up to 24 items to play in the order you choose.
e.g.
1
Press the
numbered
buttons to
select a
group, title,
track, or
chapter
(lY_g[_ then press [ENTER]).
Repeat this step to program other items.
eTo select an item using the cursor buttons
Press [ENTER] and [&, T] to select an item, then press
[ENTER] again to register.
All the items in the selected disc, title or group are selected
when you select "ALL".
Title No.
2
Press [1_] (play).
' No. Program No.
Changing the program
Press [&, Y] to select an item.
-To change an item, repeat step 1.
-To clear an item, press [CANCEL] (or select =Clear" and press
[ENTER]).
ePress [44, I_•] to skip 8 lines at a time.
To clear the whole program
Select "Clear all" with [A, _r, 4, I_] and press [ENTER].
*The program is cleared when you switch the unit to standby, open
the disc tray, select another source.
.Ir_r_ [_ [_
Times are not displayed while programming.
If youselect bonusgroups;
(-_ page 20).
Disable HighMAT disc play
t In the SETUp menu, set "HighMA_ to
(_ page 31).
2 Reinsert the disc and perform thenecessary operations.
The unit plays tracks in all the groups on a disc.
Press [1_] (play).
1
Press the numbered buttons to select
a group or a title.
• You can select more than one
group. To enter all groups, select
"All" using [<, I_[ and press
[ENTER].
eTo deselect a group, press the
numbered buttons corresponding to
the group you want to clear•
2
Press [1_] (play).
RQT6951