Using Multi-Room And Source (Mr & S) - Pioneer VSX-D1S Operating Instructions Manual

USING MULTI-ROOM AND SOURCE (MR & S$}
For example
When enjoying playback on VCR 1 on SPEAKERS A and the first monitor
TV installed in room A, you can enjoy a Laserdisc on SPEAKERS B and
MR & S monitor TV in room B.
[Operation]
2
3 °° A
[Setting MULT! ROOM & SOURCE Sub Function]
1. Select VDP/CDV with the INPUT SELECTOR switches.
2. Turn the MULTI ROOM & SOURCE ON/OFF switch ON.
© The switch lights.
e 'SUB FUNC" in the display section lights, VDP is selected.
© SPEAKERS B switch ON automatically.
© When MULTI ROOM & SOURCE is ON, the Sub function (room
B) at that time is the same as that set with the INPUT SELECTOR.
After switching MULT! ROOM & SOURCE ON, the SUB
FUNCTION can not be switched on the receiver. Switch it from
room B with the remote control unit.
[Setting MULT! ROOM & SOURCE Main Functions)
3. Select VCR 1 with the INPUT SELECTOR switches.
4. Start playback of VCR 1 and the Laser Disc player.
5. For room A, adjust volume level with the receiver's MASTER
VOLUME control.
For room B, point the remote control at the MR-100 and adjust
the volume level with the MASTER VOLUME keys.
° Switch setting and output
SWITCHES AUDIO OUTPUT JACKS
| oN | oF
| on | oF |
| or | on
Por [=
| on | on |
| on Tw
MULTI ROOM | SURROUND REC SUB FUNC REAR AMP REC
& SOURCE MODE SELECTOR OUT PRE QUT
REC SELECTOR REC SELECTOR
Function Function
es Coe
OF
OF
ti
REC SELECTOR REC SELECTOR . Y REC SEECCTOR
SUR Rear Finetion SUR Front SUR Front SUR Rear Funcom
|
In room B, when you don't know the present volume level or Sub
Function of the receiver, press the RETURN key.
The Sub Function becomes TUNER, and you will hear the
broadcast preset in station call No.1. The volume level will be that
initially set on the receiver. You can then select your desired Sub
Function, and adjust volume to the desired level.
Precautions concerning MULTI ROOM & SOURCE
¢ In room B, if you use the remote control to switch RECEIVER POWER
off (standby), power to the receiver itself is cut, so be careful when
recording or copying tapes in room A.
¢ Remember that if you operate the tuner section in room B and change
the station when you are recording a radio broadcast in room A, the
station you changed to will be recorded.
¢ The first time you use MULTI ROOM & SOURCE, volume in room B
will be set to the minimum level. Any time you use Multi-Room &
Source after that, the volume will be at the level set the previous time
you used it (except volume determined by the RETURN switch).
¢ When MULTI ROOM & SOURCE is ON, room B Sub Function and
room B volume level cannot be changed in room A.
® MULTI ROOM & SOURCE can only be switched ON/OFF with the
switch on the receiver itself. Set the Sub Function in room A, switch
MULTI ROOM & SOURCE ON, and move to room B. Volume levels
in room A and room B are independent .
¢ When operating MULT! ROOM & SOURCE with the SUB FUNC OUT
jacks connected to the room B amplifier, if the amplifier bears the
Pioneer Sal mark and has a remote sensor, both the MR-100 and
the amplifier may receive remote control commands, making correct
operation impossible. Place the MR-100 and amplifier apart frorm each
other, and point the remote control directly at the MR- 100 tooperate.
¢ in room A and room B, when a remote control signal is transmitted
at the same time, the receiver does not operate.
¢ When MULTI ROOM & SOURCE is off, the MR-100 operates as a
regular muiti-room remote sensor, so you can operate the receiver
by remote control from room B.
¢ When the rear channel PRE OUT jacks are connected to an anpilifier,
even if you switch MULTI ROOM & SOURCE ON, there will be no
sound from SPEAKERS B. Use the SUB FUNC OUT jacks fo. MULTI
ROOM & SOURCE.
© With MULTI ROOM & SOURCE, room B volume level cannot be set
to 0 (sound will still be heard). When sound is not wanted, switch
SPEAKERS B OFF; to regain sound, switch SPEAKERS B ON.
SPEAKERS OUTPUT VIDEO
TO MULTI DOM &
MONITORTV | SOURCE VDEO OUT
REC SEECTOR
Fundion
SUR Front SUR Front SUR Rear
eae
pee |
* VIDEO (REC) OUT is the same source as AUDIO (REC) OUT. When the input selector is switched to the audio source, VIDEO OUT is nutte.
SUR: Surround
39
< ARBI 272>