Table of Contents
Advertisement
t Making Calls
Hands-free Digital Speakerphone
Far best performance, please note the following
■ Talk alternately with the caller in a quiet room
■ If the other party has difficulty hearing you, press VOLUME (^) lo decrease
the speaker volume
■ If the other party's voice (ram the speaker cuts in/out during a conversation,
press VOLUME (3 to decrease the speaker volume
To adjust the speaker volume (B levels)
To increase, press VOLUME Q
To decrease, press VOLUME Q
while talking
Loud
Low III 1 llllHigh
To redial the last number dialed on the base unit
Press fDIGITAL SP-PHONE) or a line button * [REDIAL/PAUSE]
To put a call on hold
Press [LOCATOR/INTERCOM/HOLD)
■ The DIGITAL SP-PHONE indicator goes out, and
the called line button on the base unit and the
called line status icon on the handsel flash
Hold
To release the hold
Press the line button on the base unit which is flashing or the line button
on the handset whose status icon is flashing
■ If another phone is connected on the same line (p B6), you can also release
the hold by lifting its handsel
What the line buttons mean (Base unit)
Off
The line is Tree
On
You are using the line on the base unit
Flashing twice
every 2 seconds
Someone else is using the line on the handset
or parallel connected telephone
Flashing
A call is on hald
The answering system is operating an a call
Flashing quickly
A call is being received
36
Advertisement
Table of Contents
