Quick Guide - CrimeStopper Super Rage CS-2011DP Operation Instructions Manual

Dp series (data port) remote control alarm & remote engine starting system
Hide thumbs Also See for Super Rage CS-2011DP:
Table of Contents

Advertisement

OPERATION:
BUTTON 1 (Lock Symbol):
· Press and release to Lock doors.
· Press and Hold for more than 3 seconds to
activate "Panic" feature.
BUTTON 2 (Unlock Symbol):
· Press and release to Unlock doors.
· Press 2 times for Driver Door Priority Unlock.
BUTTON 3 (Trunk Symbol):
· Press and Hold for ½ second or press twice to
activate trunk pop.
BUTTON 4 (Start):
Replacement Battery
· Press and Hold for ½ second or press twice to
GP23A (12volt)
Start/Stop Engine.
BUTTON 5 (Vehicle #2/ AUX#2/AUX#3/AUX#4)
§ Veh #2 : Press and Hold for 2 sec.
§ AUX #2: Press button 5 then press button 1.
§ AUX #3: Press button 5 then press button 2.
§ AUX #4: Press button 5 then press button 4.
NOTE: BUTTON #3 and #4 Remote Start/Trunk
There is a deliberate delay or 2 presses (Optional) built into the system on button #4 and #3 to help prevent
accidental remote starting from the remote being in your pocket or purse. During normal use, if you press
button #4 or #3 too quickly, the system may not start the engine or open trunk.
*NEW* Double Button Press for Remote start and Trunk release:
This option will allow you to change whether the Remote starter and Trunk release activate by a single ½
second press or a double button ½ second press. Check with your installer or follow programming option
instructions in the installation manual.
REMOTE OPERATION QUICK GUIDE
#3
TRUNK
#1
LOCK
(AUX#2)
#4
CRIMESTOPPER
REMOTE
STARTER
(AUX#4)
3
#2
UNLOCK
(AUX#3)
START
#5
2ND VEHICLE

Advertisement

Table of Contents
loading

Table of Contents