Yamaha DX9 Operating Manual page 5

CONNECTIONS
€ Setting Up and Applying Power
The DX9 does not have an internal power amplifier, therefore either headphones or an
external amplifier/speaker system are required. A high-quality keyboard amplifier system
is recommended.
Hook up your DX9 as shown in the diagram below.
Connections
For details concerning the
CASSETTE connectors
refer to page 18.
For detaile concerning the
MIDI connectors refer to
page 21.
= [edo
AC wail outlet
(FC-4orFC-5) (РОЗА) у
Foot switch Footswitch Foot controller Mixer
(portamento) (sustain) (volume)
Speaker system with
built-in amplifier
Music stand
Headphones
| (8 - 150 ohms)
€ Turn POWER ON
The DX9 power switch is located to the right of the rear
panel (viewed from keyboard side). Turn the POWER
switch ON only after all connections to other equipment
(and to the AC supply) have been properly made. The
display pane! will appear as in the illustration below im-
mediately after power is switched on.
After a few seconds, the same mode that was engaged
before power was turned off is re-engaged. For example, if
the PLAY mode was previously engaged, the PLAY mode
will be re-engaged and the previously selected voice will be
ready for performance. The same applies to the EDIT and
FUNCTION modes.
YAMAHA Оз ж
SYNTHESIZER ж
<4>