Aiwa XR-M191 Operating Instructions Manual page 3

Outdoor Antenna
1 Power lines — When connecting an outdoor antenna, make
sure it is located away from power lines.
2 Outdoor antenna grounding — Be sure the antenna system
is properly grounded to provide protection against unexpected
voltage surges or static electricity build-up. Article 810 of the
National Electrical Code, ANSI/NFPA 70, provides information
on proper grounding of the mast, supporting structure, and
the lead-in wire to the antenna discharge unit, as well as the
size of the grounding unit, connection to grounding terminals,
and requirements for grounding terminals themselves.
Antenna Grounding According ANTENNA
to the National Electrical Code is LEAD IN
}-~-— WIRE
ANTENNA
DISCHARGE
\ UNIT
(NEC SECTION
810-20)
ELECTRIC
SERVICE
GROUNDING
CONDUCTORS
© SECTION
POWER SERVICE ree
GROUNDING
ELECTRODE SYSTEM GROUND CLAMPS
(NEC ART 250PARTH) _NEC-NATIONAL ELECTRICAL CODE
Maintenance
Clean the unit only as recommended in the Operating
Instructions.
Damage Requiring Service
Have the units serviced by a qualified service technician if:
- The AC power cord or plug has been damaged
- Foreign objects or liquid have gotten inside the unit
- The unit has been exposed to rain or water
- The unit does not seem to operate normally
- The unit exhibits a marked change in performance
- The unit has been dropped, or the cabinet has been damaged
DO NOT ATTEMPT TO SERVICE THE UNIT YOURSELF.
QWNER'S RECORD
Record the model number and serial number of your set
(found at the rear of your set) below. Refer to them when
contacting your Aiwa dealer.
Model No.
Serial No.
As an ENERGY STAR® Partner, AIWA has determined
that this product meets the ENERGY
STAR® guidelines for energy efficiency.
System and accessories
XR-M191
CX-LM191 Compact disc stereo cassette receiver
SX-LM191 Speakers
Remote control
FM antenna
AM antenna