Table of Contents
Advertisement
1. Turn Ignition ON and OFF 3 times quickly, leaving it ON the 3
chirps.
2. Push and release the Program/Override Button 5 times and the Status LED will come on solid.
3. Press #1 (LOCK) on new transmitter two times. LED goes out, siren chirps one time, and LED will flicker for
confirmation.
4. Turn off Ignition.
Note1: Repeat steps 1 through 4 to teach the unit up to 3 transmitter codes Max.
Note 2: You can program button 4 (PANIC) from another vehicle's CS-2002DC alarm to Arm/Disarm THIS alarm
system by pressing the other vehicles Button#4 two times in step 3.
ARM/DISARM with button 4 and not perform any auxiliary features on THIS system.
DIAGRAM:
TURN IGN. ON
IGN
OFF
STATUS LED
ON SOLID
TRANSMITTER PROGRAMMING
3 TIMES:
ON, OFF
ON, OFF
ON.
PANIC
PRESS BUTTON
#1 TWO TIMES
rd
time. (ON/OFF, ON/OFF, ON) You should hear (3)
The Other transmitter will only toggle
3 CHIRPS
LED GOES
OUT
PRESS
BUTTON
5 TIMES
1 CHIRP
LED FLICKER
Advertisement
Table of Contents
