Recording On Tapes - Sony LBT-G1000 Operating Instructions Manual

Recording on Tapes
You can use tape type I and II for recording.
Recording a Tape
—
——— — U]
— madah Pa A o tile dad Senne sahara cain d A g D A D KAY
1 Select a source (except TAPE) with the
function selectors.
2 insert a blank tape into deck B.
3 Press the TAPE SELECT button to select tape
type.
4 Press the @ REC button and start the
selected source.
Recording starts.
When the tape is recorded to the end, the deck stops.
To stop during recording, press the E / & button.
To start recording more precisely
1 After steps 1 to 3 above, press the II PAUSE button on
deck B.
2 Press the @ REC button.
3 Press the Il PAUSE button again to start recording.
Protecting Your Recording
Break off the tab of the side to be protected. For side A, break
off the right-hand tab facing the side A up.
This prevents further recording on that side.
Side A NSCS}
t
Tab of side B ° Tab of side A
To record on a protected tape, cover the opening with plastic
tape.
11