Table of Contents
Advertisement
ais ee)celialeRelamm fs] e. 2.)
You can use tape type | and II for recording.
Recording a Tape
4 Set the DOLBY NR switch to ON or OFF.
DOLBY NR
The Dolby NR (noise reduction) system reduces tape
hiss noise in low-level, high-frequency signals by
!
boosting the signals during recording and then
lowering them during playback.
a
a
po
=
oe
.
5 Press the @ REC button and start the selected
source.
Recording starts.
fas
1 Select a source (except TAPE) with the function
selectors.
You can also select the audio sources of equipment
connected to the VIDEO jacks.
When the tape is recorded to the end, the deck stops.
To stop during recording, press the HB 4 button.
1 After steps 1 to 4 above, press the if PAUSE button.
2 Press the @ REC button.
3 Press the tt PAUSE button again to start recording.
2 Insert a blank tape into deck B.
'ra¥ax]
3 Press the TAPE SELECT button to select tape
type.
TAPE SELECT
12
Advertisement
Table of Contents
