Panasonic Palmcorder PalmSight PV-L750 Operating Instructions Manual page 45

a
(| up
DOWN
i)
DISPLAY MENU
Motion Security may mistakenly start
when:
* background is plain, like a white wall, or
has distinct vertical, horizontal-or slanted
stripes, like a venetian blind.
* brightness suddenly changes.
Motion Security may not start when:
* motion is very slow or fast.
* moving object is very small.
* motion occurs only in 1 corner of viewing
area.
¢ in poor lighting {in this case, MOTION
SECURITY flashes).
* background is plain, like a white wall, or
has distinct horizontal or vertical stripes.
Note:
* Security recording starts if Camcorder is
bumped or repositioned.
* This feature is not available during normal
recording.
¢ While in Motion Security stand-by, the
following functions are not available:
Record/Pause, Stand-by mode, Digital
E.1.S., Video Effects (Auto/Digital Fade,
Digita) Filter).
' Security Mode
Before you begin...
« Connect Camcorder to power source.
Use AC Adaptor for longer recordings.
¢ Insert cassette with record tab (page 15).
« Set POWER to CAMERA.
* Securely position and aim Camcorder.
1 Slide DIGITAL SELECT to EIS.
2 Press MENU for MENU mode.
Press UP A or PAGE 2/2
DOWN ¥ to select] oisetay — : on
SECURITY SELF DEMO ; OFF
; OFF
VIDEO EFFECTS ; FADE
BLACK
SELECT: PUSH ¥/a KEY
SET —; PUSH OISPLAY KEY
END =: PUSH MENU KEY
3 Press DISPLAY to select ON.
4 Press MENU for Motion Security
stand-by mode. (If cassette is not
inserted, "[gg]" will flash.)
MOTION
SECURITY
MOTION
SECURITY
STAND-BY
* Recording will start about 3
seconds after motion is detected.
¢ Date and time are recorded if
displayed in EVF or LCD monitor
(page 21).
* Recording stops 30 seconds after
motion ceases.
To cancel Security Mode, set POWER to
OFF.
45