Panasonic Palmcorder PalmSight PV-L750 Operating Instructions Manual page 35

Focus
BE Nin Tact LAR Miles ata BS Fit BEE i AE TE AE AEF Sale aT Ei ie PSE 2 Pe HY LE a A Dk J AE eS
"Auto-Focus : Before you begin...
* Connect Camcorder to power source.
* Set POWER to CAMERA.
Camcorder automatically focuses on
subject even during zooming.
Auto Focus is on when "MEF" is not
displayed in EVF or LCD monitor. Push
MANUAL MANUAL 'FOCUS to remove "MF" in EVF
FOCUS or LCD monitor if necessary.
'Manual.Focus "
Use Manual Focus (MF) when : « subject is not centered in EVF or LCD monitor.
* recording through glass. * subject has shiny surface.
* lighting is poor. * subject is slanted.
¢ subject is far away with objects in foreground. ¢ subject is bright and flat, like a white wall.
¢ subject has distinct horizontal lines. ¢ subject has fast motion, like a golf swing.
1 Push MANUAL FOCUS so "MF"
(Manual Focus) appears in EVF or
LCD monitor.
e,
ti
Hold down "T" {telephoto} on
POWER ZOOM to maximum zoom
in.
Turn MANUAL FOCUS until
subject is in focus.
* Back away from subject if necessary.
4 Hold down "W" (wide angle) on
POWER ZOOM as desired.
* Refocus as needed
when aiming at new scenes.
Macro:Focus:(close-ups):
Auto Focus functions up to 12.7 mm (1/2 inch) from subject.
Hold down "W" on POWER ZOOM to maximum wide angle.
Bring Camcorder up close to the subject.
35