3.4 Hardware Health Event Monitoring Screen
This section allows you to monitor the status of the hardware on your system, including
the parameters of the CPU temperature, motherboard temperature, CPU fan speed, chassis
fan speed, and the critical voltage.
NOTE: Options vary depending on the features of your motherboard.
CPU_Fan 1 Setting
This item allows you to select a fan mode for CPU Fan 1. The default value is [Full On].
Configuration options: [Full On] [Automatic Mode]
CHA_Fan 1 Setting
This allows you to set chassis fan 1's speed. The default value is [Full On].
Configuration options: [Full On] [Automatic Mode]
Case Open Feature
This item allows you to enable or disable case open detection feature. The default is value
[Disabled].
Clear Status
This option appears only when the case open has been detected. Use this option to keep or
clear the record of previous chassis intrusion status.
50