BIOS. If you
need to clear the CMOS when you just finish updating the BIOS, you must
boot up the system first, and then shut it down before you do the clear-CMOS action.
Please be noted that the password, date, and time will be cleared only if the CMOS battery is
removed.
Chassis Intrusion Headers
(4-pin CI1_2)
(see p. 7, No. 21; p. 9, No. 22)
This motherboard supports CASE OPEN detection feature that detects if the chassis cover has
been removed. This feature requires a chassis with chassis intrusion detection design.
PWR_BAT1_SIO_AT1
(4-pin PWR_BAT1_SIO_AT1)
(see p. 7, No. 22; p. 9, No. 23)
PWR_BAT1: Only supported by chargeable battery.
Brightness Control Mode
(3-pin BLT_PWM1)
(see p. 7, No. 23; p. 9, No. 24)
Please set to 1-2 when
Please set to 2-3 when adjusting
22
4
1
4
1
3
2
1
adjusting brightness by Brightness Control bar under OS.
brightness by BLT_VOL1.
Setting
Description
Open: Normal
1-2
Short: Active Case Open
Open: Active Case Open
3-4
(Default)
Short: Normal
Setting
Description
Open: Normal
1-2
Short: Charge Battery
Open: ATX Mode
3-4
Short: AT Mode
Setting
Description
From eDP PWM to CON_
1-2
LBKLT_CTL
From LVDS PWM to
2-3
CON_LBKLT_CTL
(Default)