Pioneer KEH-P7200RDS EW Service Manual page 9

Parts Identification
Fig. 1
{2] Track number search/Fast Forward,
Reverse
[4] Disc number search
[10} Display
[11] Source selector
[12] Multi-play CD player select
[13] Function ON/OFF
[14] Disc number search
[14] @ Display selector/Edit
[14] © Pause/Random play
[14] © Title list/program clear
{14] @ ITS (instant Track Selection)/ITS Play
[14] @ Scan/Compression
{14] @ Play mode switching/Manual
Fig. 5
{36] Function indicator
{47} Magazine number
[48) Disc number
[49] COMP
{50} DBE
{51] Magazine repeat mode
(52] Disc repeat mode
[53] Elapsed play time display
(54) Track number
[55] Manual
Track Number Search
The desired track on the disc currently be-
ing played can be selected by track (or
song) number.
Make sure "MANU" [55] is not displayed
on the display. If it is, hold down button @
in Bank [14] more than 2 seconds.
Press the (P) side of button [2] to increase
the number at Position [54], or the (<4) side
to decrease the number. Holding either side
of button [2] down changes the track num-
ber at high speed.
Function Mode
if the 12-disc magazine CD player CDX-
P1210 is combined with this unit, button
[14] acts as the disc number search button.
Press button [13] to switch between the
function mode and disc number search but-
ton.
When the function is turned on, subsequent
operations can be performed.
Using Fast Forward and Reverse
1.Hold down button @ in Bank [14] more
than 2 seconds. "MANU" [55] appears on
the display.
2.Press the (P) side of button [2] for fast
forward, and the (<4) side for reverse.
« Sound is output during fast forward and
reverse operations.
KEH-P7200RDS,P71I0O0ORDS ,PG200ORDS ,PGIOORDS ,P25ADS,PISRDS
Using the Multi-Play CD Player
1.Press button [11] to change the display to
the multi-play CD player mode and to be-
« After you press a button in Bank (4), [14],
it may take some time before play begins
due to the time necessary to load and set
gin disc play. the disc in the mechanism.
Each press of button [11] changes the mode _ — * If the 12-disc magazine CD player CDX-
as follows: P1210 is combined with this unit, button
Tape -- Radio — Multi-play CD player — [14] acts as the disc number search but-
OFF ton. Press button [13] to switch between
2.Use the Disc Number Search function to the function mode and disc number
select a disc. search button.
Select the desired disc by pressing one of
the buttons in Bank [4], [14]. The number of
the disc selected appears at position [48] on
the display.
+ if the number at position [48] on the dis-
play does not change when you press a
button in Bank (4), [14], it means that
there is no disc loaded in that tray.
3.Adjust volume and tone.
4.To stop disc play, press button [11].
At another press, the normal play resumes
from about where it stopped.
When used to search the disc number,
turns function OFF.
Note:
« When you turn the power on or change
the disc to be played, the multi-play CD
player may perform a preparatory opera-
tion (verifying there is a disc, reading disc
information, etc.). "READY" is displayed
during this time.
When the multi-play CD player is not
working corrently, an error message ap-
pears on the display (Ex: "ERROR80").
{dentify the error from the multi-play CD
player owner's manual.
Repeat
You can select one of the play modes (repeat modes) listed below.
Play the current track repeatedly.
Play mode
{repeat mode)
One-Track Repeat
Magazine Repeat
ALL Repeat
Each press of button @ in Bank [14] causes the mode to change as follows:
One-Track Repeat ("RPT" appears on the display [53]) — Disc Repeat ("CDISC_)" [52] ap-
pears) — Magazine Repeat (" " {51] appears) > ALL Repeat
* When you perform track number search or fast forward or
rewind, the mode changes to disc repeat mode.
* Switching the multi-CD player being played or the disc
switches to magazione repeat mode.
Play the same disc repeatedly.
+ Switching the multi-CD player being played or the disc
switching to magazine repeart mode.
Play ail discs loaded in the magazine in the multi-play CD
player repeatedly. All discs in the magazine are played repeat-
edly from the first disc.
The mode changes to this mode when 2 or more multi-play
CD players are connected. Multi-play CD players 1 to 4 are
played.