Pioneer KEH-P7200RDS EW Service Manual page 59

| cxX-631
1.2 LOADING AND EJECT OPERATIONS
@ Loading the Cassette Tape
1.Push the cassette tape by finger.
2.The draw-in lever is pushed by the cassette tape. And the load switch is turned on by way of the draw-
in arm and of the load switch arm.
3.The sub-motor starts running.
4.The mode gear turns in direction (1).
5.The put-down driving lever moves in direction (2).
6.Move the put-down lever operation shaft in direction (3) and turn the draw-in arm in direction (4).
7.The cassette tape is loaded.
Put-down driving lever
Mode gear
Put-down lift cam
Lift Position —> Put-down lever operation shaft
Put-down
Position
Draw-in arm
Put-down driving lever Put-down lever
Fig.2
ClibPDF - www.fastio.com