Pioneer KEH-P7200RDS EW Service Manual page 10

Random Play
The microcomputer of the multi-play CD player can play tracks on discs in a random order.
Random play is performed according to the current play mode (repeat mode) as follows:
Tracks to be played at ramdom
All tracks on the disc being played.
« The play mode changes to disc repeat mode.
All tracks on the disc being played.
All tracks on the discs in the magazine being played.
All tracks on all discs in multi-play CD players 1 to 4.
* When 2 or more multi-play CD players are connected.
Play mode
(repeat mode)
One-Track Repeat
Disc Repeat
Magazine Repeat
ALL Repeat*
Using Scan
The first parts of each track are played in succession for about 10 seconds. This function is
useful to search for the track or disc you want to listen to. Scan is performed according to
the current play mode (repeat mode) as follows:
Piay mode
eepeat mode) Tracks to be scanned and played
One-Track Repeat All tracks on the disc being played.
« The play mode changes to disc repeat mode.
All tracks on the disc being played.
Magazine Repeat The first tracks of all the discs in the magazine being played.
ALL Repeat* First tracks of all discs loaded in multi-play CD players 1 to 4.
* When 2 or more multi-play CD players are connected.
KEH-P7200RDS,P7iIOORDS,PG2OORDS ,PGIOORDS,P2SRDS,PISRDS
1.Select the desired random play mode (re-
peat mode).
2.Hold down button ® in Bank [14] for
more than 2 seconds. ("RDM" appears
on the display [53].) To cancel random
play, hold down button © in Bank [14] for
more than 2 seconds again. ("RDM" dis-
appears.)
Since selections are played in random or-
der, the same selection may be played
twice in succession.
1.Select the desired random play mode (re-
peat mode).
2.Press button @ in Bank [14]. ("SCAN" ap-
pears on the display [53].) The first parts
of all tracks are played in succession for
about 10 seconds.
3.When you hear the track you want, press
button @ in Bank {14] again to cancel
Scan. ("SCAN" disappears.) The track
(disc) being played then plays to the end.
* The previous function automatically re-
sumes when a piece of music with which
Scan began returns.
ITS (Instant Track Selection)
This function lets you program and play the
tracks you want. You can listen to just your
favorite tracks.
The ADPS function* of the multi-play CD
player lets you program up to 100 discs.
(Up to 100 discs can be programmed in-
cluding disc title inputs.)
* ADPS: Automatic Disc Program Selection
Up to 99 tracks can be programmed for a
single disc.
When the number of discs exceeds 100,
discs not being played (Information not
being renewed) in memory is overwritten
by the newest.
Tracks are programmed for each disc.
Programmed tracks are not erased after
the disc is changed.
Programming
1.Play the track you want to program.
2.Press button @ in Bank [14] to program
the track.
("ITS* appears on the display (53) for 2
seconds.)
* Program tracks while ITS play is not in
Progress. It is possible during scan play
or random play.
10
ITS Play
Tracks stored only in memory are played in order. Tracks are played according to ITS play
mode (repeat mode) as follows:
Play mode
(repeat mode) Tracks to be played by ITS
One-Track Repeat Programmed tracks on the disc being played.
* The play mode changes to disc repeat mode.
Programmed tracks on the disc being played.
Magazine Repeat Programmed track on the discs in the magazine being played.
+ If the disc being played contains no programmed tracks, the
ALL Repeat*
next disc containing programmed tracks is played.
Programmed tracks on all discs in all magazines in multi-play
CD players 1 to 4.
+ If the disc (multi-play CD) being played contains no pro-
grammed tracks, the next disc (multi-play CD) containing
programmed tracks is played.
* When 2 or more multi-play CD players are connected.