Table of Contents
Advertisement
e@ lf the power cord plug is disconnected from the AC outlet, or the TV aerial is caus-
ing problems, the user often regards these as trouble with the TV itself; be sure to
check the following items before calling for service.
Important:
e@ Review all the instructions written in this booklet.
Problems
Causes
Measures
=)
No power supply
Is the power cord plug
disconnected?
Insert the plug in an AC out-
let.
Is the Main Power switched
off?
Press the Main
Power
but-
ton?
No picture or no|
Is the aerial disconnected?
Check the aerial connections.
sound
Are headphones plugged in?
+
Disconnect the headphones.
1
Is the speaker switch set to
"EXT"?
Set the speaker switch to
"INT + EXT".
Is the input mode (TV, EXT 1,
EXT 2 and EXT 3) set to an
incorrect position?
Press the input mode select
button to engage the correct
mode.
Are the COLOUR and
BRIGHT controls adjusted
incorrectly?
Wrong colours
Adjust
the
COLOUR
and
BRIGHT controls.
Has it been received in the
SECAM mode, in spite of
the PAL broadcasting?
The
picture
is
black and white
Inoperable remo-
te Control
Are the batteries' +/- poles
placed correctly?
Are batteries exhausted?
Replace the batteries.
Reset to P/S AUTO,
using
PAL/SECAM button((P)(S)).
Re-install the batteries cor-
rectly.
Could there be interference
with a personal computer, TV,
Lines or streaks
in picture
(interference)
audio component, etc. or
jamming by a radio station,
etc.?
Video
Cassette
Recorder,
Move the components apart
until the interference is elimi-
nated.
Move aerial to a different
position or turn it to a differ-
ent direction.
Could there be interference
from a hair dryer, electric
cleaner, neon sign, high-
tension wire, automobile,
motorcycle, etc.?
Spotted
picture
(crosstalk)
Move
aerial away from the
source of interference.
Replace aerial cable with a
coaxial cable, which
is less
prone to interference.
Double
pictures
(ghost)
TV broadcast station be
affected by reflected signals
from mountains or buildings,
etc.?
Could the direct signals from a
Move
aerial to a different
position, height or direction.
Replace with an aerial having
good directivity.
Is the external aerial cut or
disconnected?
Snowy
picture
(image noise)
Check the aerial connection.
Is aerial turned in the wrong
direction due to strong wind,
etc.?
Direct aerial correctly.
Is the aerial damaged?
Replace or repair the aerial.
No sound with
stereo broadcast
Is the Sound mode selection
set to "Mono" mode?
-A7-—
=
No receivable
Is the TV tuned to a Teletext
Tune to a channel that broad-
Teletext
channel?
casts teletext information.
programme
L
Press the sound
multiplex
button
(OO/I
) to set the
Sound mode to "Stereo".
ENGLIS
Advertisement
Table of Contents
