Table of Contents
Advertisement
ENGLISH
changes into the following.
Setting is completed, and the on-screen
indica-
tion disappears in 'about 3 seconds.
When set to "On":
When set to "Off":
Plesee
Select
On)
Please
Select
Orn
1.0n
2.0FF
1.0n
2. OFF
| [3] Tone Preset
This function, the "SSM"
(Sound Status Memory), allows presetting of "Bass"
and "Treble" sound tone levels, which are available when selecting "5.
User
Position" by using the Tone select button ()).
Important:
e@ Sound tone presetting is only possible for "5. User Position".
e 1. Soft", "2. Clear", "3. Heavy" and "4. Vocal" sound tone settings cannot be
1. Ser-up "Station
ID
altered.
e SSM operation has no effect on balance setting between speakers.
@ The selected sound tone (by selecting a sound tone 1 to 5 using the Tone select
button ( J} ), or by adjusting bass or treble directly) always will be restored to
the level that has been previously set, even if a different channel is tuned to, an
input mode is switched, or TV power is turned off and on again.
Therefore, in
order to re-adjust the sound tone, first press Tone select ( J) ), then press 1 to 5
to select a different sound tone, or re-adjust bass or treble directly.
Setting the sound tone:
1. Press the MENU button ( (i) to call up Page-1 Menu.
2.
Press "3". The following appears on the screen.
User Poe nt tron
Treble
a
J
Enter
OB To Exit
3.
Select "Bass" or "Treble" with the Control ( 4 / wv) buttons of the Menu
Control section. The selection turns magenta colour.
4.
Press the Control (-/+) buttons of the Menu Control section to adjust the
level. The marker moves.
+ button: marker moves right.
— button: marker moves left.
- button
Low
Low
a
Repeat steps 3 and 4 to complete tone adjustment.
6.
Press "1".
The "User Position" indication blinks once.
The on-screen indication disappears in about 3 seconds to indicate setting is
[2] [3] [a]
completed.
| ae
Ce} (7) Le]
[4] Video Status Memory
A VSM
(Video Status Memory)
setting can be made for each individual
source
selection (TV or external video input modes EXT 1, EXT 2 and EXT 3).
After setting of the VSM, the "Colour", "Bright", "Cont." and "Sharp"can
be
adjusted as usual.
However, when an input mode is switched or TV Power is
turned off and on again, their settings will be restored to the VSM setting s that
. eee eee
were previously made.
patie
Important:
e For the TELETEXT and MIX modes, the VSM function has no effect.
@ Even if the on-screen background is set to ON with "4. Message Style' of the
"6. Set-Up Menu" feature, no background appears behind the on-screirm
indi-
cation for the VSM setting.
99.2
Advertisement
Table of Contents
