Setting The Toll Saver Switch; Using The Reset Button - Uniden EXV 990 Owner's Manual

Cordless telephone and digital answering device integrated with voicedial technology

Table of Contents

Color profile: Disabled

Composite

Default screen

C:\Exv990\exv990 part 2 of 2.vp

Wed Sep 09 08:58:04 1998

SETTING THE TOLL SAVER SWITCH

The ring time/toll saver switch

allows you to set the number

of rings the caller hears before

playing your outgoing message.

You can set the switch to answer

after two or four rings. In the

(Toll Saver) position, the answering system picks up after

two rings if you have new messages, and after four rings if

there are none. This way, if you call long distance to check

your messages, you can hang up after the second ring to

avoid being billed.

The

button reinitializes the

RESET

base computer after power failure.

The reset button is used if an AC

power line disturbance causes the

answering system to malfunction

and become inoperative. Pressing

does NOT erase any data

RESET

stored in your system memory.

Table of Contents