Erasing A Stored Number; Dialing A Stored Number - Uniden EXV 990 Owner's Manual

Color profile: Disabled
Composite Default screen
When the voice prompt
says "Replace memory
[location number]. Say yes
or no," if you don't say
anything within 3 seconds,
you will hear "closer
please." If you still don't
respond, the handset beeps
and the programming
procedure cancels.
When you are ready
to talk on the phone,
press speaker to hear
through the handset
earpiece.
C:\Exv990\exv990 1 of 2.vp
Wed Sep 09 09:09:52 1998

ERASING A STORED NUMBER

1) Remove the handset from the base.
2) Press . The LED blinks
store talk
and, in speaker mode, the
LED lights.
speaker
You will hear:
3) Enter the 2-digit memory location
number that you want to erase.
For example enter then
0
You will hear:
4) Say "Yes."
5) Press . This erases the memory location
store

DIALING A STORED NUMBER

1) To dial a number from the handset,
remove the handset from the base.
Press .
voice
To dial a number from the base,
press .
VoiceDial
2) You will hear:
For example, if you have programmed John Smith in
location 01 at 555-555, you say "John Smith."
Or, you can enter the two-digit memory location where John
Smith's number is stored. For example: enter
You will hear:
3) The number will automatically dial.
.
1
then .
0 1
15