Standard Use Of Your New Phone; Making & Receiving Calls - Uniden EXV 990 Owner's Manual

Color profile: Disabled
Composite Default screen
C:\Exv990\exv990 1 of 2.vp
Wed Sep 09 09:09:38 1998
STANDARD USE

Standard Use of Your New Phone

MAKING & RECEIVING CALLS
AutoTalk allows you to answer a call by just removing the
handset from the base, eliminating the need to push buttons
or flip switches.
Standard calls without using the memory features
Standard
Calls
without
using
the Memory
Features
Handset in Base
To answer call
Press VoiceDia l.
To make a call
1) Press VoiceDial
2) Listen for tone.
3) Say name.
To hang up Press
VoiceDial .
To redial
Sometimes when you press
may get an error tone and the phone will not disconnect.
If this happens, place the handset in the base or press
again while holding the handset close to the base.
Using the memory features
1) Press
voice.
2) You will hear:
3) State the name of the party you are
calling. (See "Voice Memory Entry Tips"
on page 18 for VoiceDial programming.)
Or, you can enter the two-digit memory
location where your number is stored.
For example: enter then
0
Base Only
Handset Off Base
Press any key.
Press VoiceDial.
1) Press
talk .
.
2) Listen for tone.
3) Dial number.
Press or return
Press VoiceDial.
talk
handset to base
(AutoStandby).
1) Press .
talk
2) Listen for tone.
3) Press
.
redial
to hang up the phone, you
talk
.
1
talk
9