Vox/Calling Party Control Feature; Setting The Toll Saver Switch - Uniden XCAI680 User Manual

A tone will sound, and you hear the preset message "Hello. No one is available to take your
call, please leave your message after the tone" on the Base Unit speaker. A second tone
sounds after the preset message plays, and the Answering System automatically returns to
Standby.
Note: If the REC TIME/ANN/4/1 switch is set to Announce Only, then the preset message
"Hello. No one is available to take your call" is played.
3. To select your recorded message again, press ogm .
The preset message will begin to play on the Base
Unit speaker.
While the preset message is playing, press ogm again.
4.
A tone will sound, and your recorded message will play on the Base Unit speaker. A second
tone sounds after your message plays, and the Answering System automatically returns to
Standby.

VOX/Calling Party Control Feature

The Calling Party Control (CPC) feature allows your Answering System to disconnect and reset if the
caller hangs up before leaving a message. This prevents your Answering System from using
recording time to record a hang up/dial tone message.

Setting the Toll Saver Switch

The Ring Time/Toll Saver switch allows you to set the number of rings the caller hears before your
Answering System answers. You can set the switch to answer after 2 rings or after 4 rings. In the
TS (Toll Saver) position, the Answering System answers after two rings if you have new messages
recorded, and it answers after four rings if there are no new messages. So if you call long distance
to check your messages, you can hang up after the second ring and not be billed.
45