Table of Contents
Advertisement
Switching between 12-hour
and 24-hour Timekeeping
1.
Hold down the (A) button for about two
seconds.
[SET] will appear first, followed by the
Home Time City name.
2.
Press (D) four times until the current
setting ([12H] or [24H]) is flashing on the
display.
3.
Press (E) to toggle the setting between
[12H] (12-hour timekeeping) and [24H]
(24-hour timekeeping).
4.
Press (A) twice to exit the setting screen.
Note
While 12-hour timekeeping is
●
selected, the PM indicator will
appear on the display while a p.m.
time is shown.
PM indicator
Operation Guide 5427
Summer Time
Summer time, which is also known as Daylight
Saving Time (DST), advances the time setting
one hour, 30 minutes, or some other amount
of time from standard time (STD) during the
summer months. Whether or not and how
summer time is used depends on your country
or local area. Summer time is not used in some
countries and local areas.
Selecting a Setting Item
Each press of (D) cycles the Timekeeping
Mode settings screen content in the sequence
shown below.
Home Time City
Summer time
Tone ON/OFF
Illumination duration
12/24-hour timekeeping
Power Saving Setting
Seconds
Hour
Minute
Year
Month
Day
World Time
World Time lets you look up the current time
in any one of 40 cities around the globe.
Getting ready
Perform this procedure in the Timekeeping
Mode. Use (D) to navigate to the Timekeeping
Mode.
Navigating Between Modes
l
Timekeeping Mode
World time
Checking the Time in Another
Zone
1.
Hold down the (A) button for about two
seconds.
[SET] will appear first, followed by the
Home Time City name.
2.
Press (A).
3.
Use (B) and (E) to scroll through city
names until the one you want is displayed.
This will cause the current time in the
selected city to appear.
Holding down (B) or (E) scrolls city
●
names at high speed.
City name
4.
Press (A) to return to the Timekeeping
Mode.
The small hour and minute hands will
indicate the current time in the city you
selected.
Time of selected city
10
Advertisement
Table of Contents
