Table of Contents
Advertisement
Phone-Watch Connection
Q1
I can't establish a connection
between the phone and watch.
Have you tried turning your phone off and
then back on again?
Turn the phone off and then back on, and
then tap the CASIO WATCH+ icon. Next,
on the watch, hold down the CONNECT
button (C) for about 0.5 seconds.
Has the watch been re-paired with the
phone?
Perform the procedure below and then re-
pair the watch and phone.
A Delete the pairing information from
the watch.
B Delete the pairing information from
CASIO WATCH+.
C Delete the phone pairing information.
Unpairing
l
Changing to a Different
Phone Model
Q1
Connecting the current watch to
another phone.
Clear pairing information from the watch you
are currently using, and then pair with another
phone.
If you purchase another phone
l
Operation Guide 5427
Phone Finder
Q1
Phone Finder does not work.
Are the phone and watch disconnected?
Phone Finder does not work during
Bluetooth connection.
Is CASIO WATCH+ running on your
phone?
Check if CASIO WATCH+ is running on
the phone. On the Home Screen, tap the
CASIO WATCH+ icon.
Other than the above.
If the phone does not respond after a few
seconds, it could mean that the phone is
located too far from the watch. Change to
a different location and try again.
Q2
It takes some time before the phone
responds.
The phone will emit a tone when a connection
is established with the watch, which takes a
few seconds.
Q3
The phone cannot be found even
when it is close to the watch.
Since communication is performed using
radio waves, the watch may not be able to find
the phone even if it is within two meters.
Certain environments may make the
allowable communication range very short.
Auto Time Adjustment
Q1
When does the watch sync its time
setting with the phone?
You can use the CASIO WATCH+ to specify
the auto adjust start time. The watch will also
automatically sync its time with the phone time
when they are connected.
Q2
Time is not adjusted when the auto
adjust time is reached.
Is the time setting adjusted 30 seconds
after the preset time is reached?
About 30 seconds after the specified auto
adjust time is reached, the watch will
connect with the phone and adjust its time
setting accordingly.
Is the timer performing a countdown
operation?
The time setting is not adjusted while a
timer countdown operation is in progress.
Q3
Time is not displayed correctly.
Is the time setting on your phone correct?
Correct the phone's time setting.
iPhone Users
"Settings" n "Privacy" n Turn on
"Location Services" n "System
Services" n Turn on "Setting Time Zone".
Android Users
Refer to your phone's user
documentation.
Other than the above.
Establish a connection between the
phone and watch and correct the time
setting.
Auto Time Adjustment
l
18
Advertisement
Table of Contents
