Table of Contents
Advertisement
1
1
1
14
1
14
Move to desired location
If
If machine can be
moved without
adding or removing
weight stacks.
If
If machine needs
weight stacks
removed before
moving to desired
location.
Cybex Owner's Manual
4800-557
Decal, Weight Plate (10-150) (Light)
13000-552
Decal, Weight Plate (10-220) (Standard)
4700-337
13000-032
4700-338
Weight Stack Plate (Standard)
13000-036
Weight Plate Pack (Standard)
Two people will be required for this procedure
1. Move to desired location.
2. Remove the four shipping cones using a 3/4" socket or wrench.
3. Attach foot pads to each foot of frame.
Two people will be required for this procedure
1. Remove the two Button Head Socket Cap Screws (BHSCS)
securing the top cap to the frame using a 7/32" Allen wrench.
2. Remove top cap and BHSCS.
3. Lift shroud up and out of machine.
Weight Stack Plate (Light)
Weight Plate Pack (Light)
Then
Then
BHSCS
Top Cap
10
NOTES:
MATERIAL:
EXCEPT AS NOTED
DIMENSIONS
REMOVE ALL BURRS
OWATONNA
IN INCHES
BREAK SHARP EDGES
1. Font - 40 POINT HELVETICA BOLD.
GENERAL
.005/.010 R
TITLE:
DECAL, WT PLATE (10 - 220)
HORIZONTAL SCALE 80%.
TOLERANCES:
SURFACE FINISH
ALL MATERIAL MUST COMPLY TO
2 DECIMALS ± .03
INDICATED PER
TRACKING -50.
EUROPEAN UNION DIRECTIVE
ANSI B46.1-1985
2002/95/EC RoHS (RESTRICTION
3 DECIMALS ± .015
DWG. BY
DATE
TECH. PUBS. APPR.
DATE
OF HAZARDOUS SUBSTANCES)
ANGLES ± 1°
REMOVE CARBURIZATION
REL
1/8/07
BB
1/11/07
AND SCALE FROM LASER
FINISH:
FEATURES SHOWN
AND PLASMA CUT EDGES
CHECKED BY
DATE
MFG. APPR.
DATE
PERPENDICULAR OR
PARALLEL SHALL BE
GENERAL
125
SO WITHIN ± 1°
MACHINING
SIZE
B
1:1
SCALE
2
SHEET
2
DWG. NO.
13000-552
REV.
-
OF
Shroud
Advertisement
Table of Contents
