Intermatic Grasslin thermio eco C2 Operating Manual page 7

1 SELECT button
2 Boost button
3 ADV. button
4 Holiday button
5 Plus/minus buttons
The "thermio™ eco C2" thermostat is used to regulate two heating circuits. Hot water or heating cir-
cuits can be connected and regulated independently of each other. Individual regulation of, for example,
central heating and hot water is implemented using two independent switching outputs.
In the standard method, the water or room temperature is regulated by switching the device on and off
for periods of time. The on and off times for these periods can be programmed individually. In addition,
you can set a setpoint for the room temperature if the temperature regulation function is activated. An
additional frost protection function protects the device or the connected pipelines against frost when the
device is switched off.
6 MODE button
7 RESET button
8 Selection switch for operation, time and
programming
9 Cover
EN
7