Programming periods
To keep the water and room temperature at a constant level, the system is switched on and off for
periods of time. There are a total of three periods available for each day, and each can be programmed
individually. You specify the switch-on time and switch-off time for each period.
Personnel:
•
User
Prerequisite:
•
Cover is open.
1.
Slide the selection switch (Fig. 1/8) to
ð
The display turns on.
Periods for water temperature
2.
Set the time for P1 ON with
3.
Set the time for P1 OFF with
4.
Repeat steps 2 and 3 for the following two periods.
Three periods are programmed for regulating the water temperature.
ð
44
PROG
SET.
and save it with
.
and save it with
.