Setting The Temperature Setpoint - Intermatic Grasslin thermio eco C2 Operating Manual

Setting the temperature setpoint

Personnel:
• User
Prerequisite:
• Cover is open.
• A jumper is inserted in the opening for the temperature regulation function (Fig. 2/3).
1. Press and
2 or 3 is selected.
2. Press and hold
The temperature flashes on the display.
ð
multiples times in succession until one of the operating modes ON, 1,
simultaneously for at least five seconds.
If the frost protection function is active (jumper inserted), the temperature for
the frost protection function is set first, followed by the temperature setpoint.
EN
41