Stihl FSA 120.0 Instruction Manual page 16

English
slide (1) shows the power level that has been
set.
The selected power level affects the battery's
runtime.
–
: ECO power level, low performance
–
: Maximum power level, maximum
performance.
When the maximum power level is set, the
brushcutter recognizes the cutting attachment
that has been attached and automatically adjusts
the appropriate speed of the blade.
When the Eco power level is selected, the speed
is reduced.
This can extend the battery running time.
1
► Use your thumb to slide the power level
slide (1) into the desired position.
13.3 Mowing
The cutting height is determined by the distance
of the cutting attachment from the ground.
Mowing with a mowing head (A)
► Swing the brushcutter steadily back and forth
in an arc.
► Walk forward slowly and steadily.
Mowing with a grass cutting blade (B)
16
A
► Mow with the left part of the metal cutting
attachment.
► Walk forward slowly and steadily.
For optimum performance, observe the recom‐
mended temperature ranges,
13.4 Adjusting Nylon Line
13.4.1 Line Feed on AutoCut Mowing Heads
► Briefly tap the rotating mowing head on the
ground.
About 30 mm of fresh nylon line is advanced.
The line limiting blade in the deflector auto‐
matically cuts the mowing lines to the correct
length.
2
Automatic feed will not take place if the mowing
lines are shorter than 25 mm.
► Switch off the brushcutter and remove the bat‐
tery.
► Depress the spool (1) on the mowing head
and hold it depressed.
► Pull out the mowing lines (2) by hand.
► If the mowing lines (2) cannot be pulled out to
the required length: Replace the spool (1) or
the mowing lines (2).
The spool is empty.
13.4.2 Line Feed on SuperCut Mowing
Heads
Mowing lines are advanced automatically. The
B
line limiting blade in the deflector automatically
cuts the mowing lines to the correct length.
Automatic feed will not take place if the mowing
lines are shorter than 40 mm.
► Switch off the brushcutter and remove the bat‐
tery.
► Pull out the mowing lines by hand.
► If the mowing lines cannot be pulled out to
required length: Replace the mowing lines.
The spool is empty.
13 Operating the Trimmer
21.4.
1
0458-028-0101-A