Installing A Telephone Line Filter Or Dsl Filter; Resetting.the.handset - Uniden DECT1588-2 User Manual

Installing a telephone line filter or DSL filter

Any.broadband.Internet.service.that.uses.your.telephone.
line.might.interfere.with.standard.phones..The.most.common.type.
of.these.services,.DSL,.often.causes.static.on.your.telephone..
Fortunately, an easy-to-install filter removes this static from the line.
Technicians who install DSL service usually leave several filters for
the customers; if you can't find them, call your DSL provider or look
in.any.electronics.store.
Just plug the DSL filter into the telephone wall jack and then plug
your phone's base into the filter. Make a test call to make sure the
noise.is.gone.
Resetting the Handset
You.may.need.to.reset.your.handset.in.the.following.instances:
• You.lose.a.handset.and.purchase.a.new.one.
• You.get.the.message.Registration.Failed.when.you.try.to.register.the.handset.
• You.are.unable.to.register.any.handsets.to.the.base.
• When.you.register.new.handsets.to.the.base,.the.handset.IDs.do.not.match..(For.example,.the.handset.registers.
as."Handset.#4".but.you.only.have.two.handsets.)
• When.you.are.instructed.to.by.one.of.Uniden's.call.center.representatives.
1) Select.the.base.you.want.to.de-register.the.handset.from.(see.Selecting.the.base.on.page.15).
) Press.and.hold.END.and.# for more than five seconds. Select Deregister HS.
3) Select.the.handset.which.you.are.operating,.and.then.press.MENU/SELECT.
4) The phone will ask you to confirm the deregistration. Select Yes..The.selected.handset.will.clear.its.registration.
information.only.from.the.base.it.is.currently.connected.to,.and.then.delete.the.link.to.the.base.from.its.own.
memory.
5) When.the.base.information.is.deleted,.the.handset.displays.Handset not registered-place handset on base to
register. See your Owner's Manual for help.
59
Telephone Telephone
wall jack wall jack
Telephone Telephone
cord cord
DSL filter DSL filter