Uniden FRS1400-2 User Manual page 16

Your radio also allows you to scan for
active channels.
To use the Scan feature:
1. Press and hold the
mode/scan
button for one
second to begin
scanning channels.
The LCD will
indicate you are in
scan mode. If a
signal is present,
the radio will stop on
the active channel
for five seconds.
2. Press the up button to resume scanning
for the next channel.
3. To delete the current channel from being
scanned, press the down button. The unit
will immediately resume scanning for
other channels.
The memory for deleted channels is
cleared each time the mode/scan
button is pressed and held for one
second or after the unit is turned off.
12