Kenwood TH-75A Instruction Manual page 13

@ CALL CHANNEL MODE
=
SUB BAND
© If the current frequency is in VFO mode:
You can press the UP/DWN keys to select the disired fre-
quency of the SUB band.
4-2-3. FREQUENCY STEP SELECTION
MAIN BAND
Lip Press the F key. The F in-
dicator should light in the
display.
. Press the MHz/STEP key
within 10 seconds of
pressing the F key. The
current frequency step size
will be displayed.
. Rotate the Tuning control
until the desired tuning
step size appears in the
display.
. To complete the program-
ming of the step size you
can press any key on the
front panel, or simply wait
10 seconds and the
microprocessor will auto-
matically return to the nor-
mal frequency display.
SUB BAND
TH-75A TH-75E
144 MHz Band 5 kHz 12.5 kHz
430/440 MHz Band
25kHz
| 25 kHz
The accompanying figure shows
how the Tuning control will in-
crease or decrease the step size.
§ 15 C8 ie 2S
Leer ai corset |
It is not possible to select the Frequency Step directly while
in the SUB Band. Change to the MAIN band if you want to
alter the step size. Then return to the SUB band.
13