Performing The Preview Scan - UMAX Technologies Astra 6400 Owner's Manual

Scanning an item via the Beginner window consists of just a few
steps:
1.
Perform a preview scan of the item to be scanned by clicking
the Preview button. The item is quickly scanned at low-
resolution, and is displayed in the Preview window (on the left
side of the VistaScan Beginner window).
2.
Select what you want to do with the image after it is scanned
using the Scan To icons.
3.
Specify what kind of image you are going to scan, and start the
final scan process using the Click To Scan icons.

Performing the Preview Scan

The Preview feature lets you scan an item at low-resolution so you
can define the specific area to be scanned when you scan at higher
resolution.
To preview the item you are going to scan:
1.
Place the item you want to scan facedown on the object glass,
under the inverted triangle that appears in the center of the rear
ruler.
2.
Click the Preview button on the right side of the Beginner
window.
The image is quickly scanned and displayed in the Preview
window.