Table of Contents
Advertisement
Schematic diagram: Electrical interfaces on the vehicle
Code
Description
1
EK1
Terminal strip for the electrical connection on the seat box of the driver's seat
2
LC4
Pushbutton switch in overhead control panel (OCP)
3
E5M
Extension of PSM standard contact
Code table for eSprinter model series 907 (additional special equipment)
Code
Description
ED8
Pre-installation of electrics for parameterizable special module
E2A
Tapping wire for ABH special signals in cockpit
E4A
Antenna interface for radio, navigation and cellular telephone system
⑴ NOTE
Observe the legal specifications for the installation
of lighting systems detailed in the Body-Equip-
ment-Guideline for Sprinter Vans.
Mercedes-Benz | Supplemental Guideline for eSprinter – Model Series 907, Edition 2023-8
8 Electrics and electronics
45
Advertisement
Table of Contents
