F 0 Display Units, Switch Output Specifications And Diagnostic Information Selection Function - SMC Networks ZSE20CF-L Operation Manual

■[F 0] Display units, switch output specifications and diagnostic information selection function
This setting is only available for models with the units selection function.
The unit that can be displayed is different depending on the pressure range.
(kPa/MPa can still be selected if the product does not have the units selection function.)
<Operation>
Press the or
Display unit selection
Press the or
Press the
Switching setting of switch output NPN/PNP specifications
The switch output of this product can be switched to NPN or PNP output in accordance with
the user device construction.
Press the or
Press the
button in function selection mode to display [F 0].
Press the button.
button to select the display unit.
button to set.
button to select switch output specification.
button to set.
-32-
Move on to display unit selection.
Move on to the switching setting of
switch output NPN/PNP specifications.
Move to the setting of diagnostic information selection.
No.PS※※-OMX0002