CYBEX Arc Trainer 772A Service Manual page 159

Remove back cover
Remove the four screws securing the back cover to the console assembly using a Phillips screwdriver.
Remove console assembly
Remove the six screws securing the console assembly to the console support using a Phillips screwdriver.
Cybex 772A, 772AT Arc Trainer Part Number
Shock and electrocution hazard.
• Unplug unit and let sit 10 minutes before cleaning or performing
maintenance.
• Electrical charge can remain in unit after unplugging.
• Keep water and liquids away from electrical parts.
Component damage.Wear an ESD grounding strap during this procedure.
Connect ESD grounding strap to frame bolts or unpainted metal of frame. If
ESD grounding strap is not available, touch frame bolts or unpainted metal
of frame before handling any electronics.
Page 159 of 202
Item Description
1 Console assembly
2 Back cover
3 Screws
Item Description
1 Console assembly
2 Console support
3 Screws
Qty.
1
1
4
Qty.
1
1
6