Advertisement
7
BEFORE ASKING FOR REPAIR
★ In case the system does not provide a satisfactory performance, check possible causes, such as; Unplugged?
Disconnected wire? Shorted wire? If you still cannot find the cause, consult the dealer or distributor that you
E
urchased the product from.
'0
not attempt to open front case of MY-1CD, without first unplugging power supply. High voltage is present on
the monitor unit inside.
★ Refrain from spraying water at the door station directly, regardless that the unit is designed to be weather-
resistent.
★ Clean your MY-1CD equipment by a soft cloth dampened with neutral household cleanser.
★ When the temperature outside lowers rapidly (after rain, etc.), the camera lens may be fogged and offer a dim
image at the video monitor. This is not a malfunction, and will return to normal shortly.
SPECIFICATIONS
Power source
MY-1CD; DC 18V. Use a power supply PS-18YC/A (AC 120V)
or PS-18YD/A (AC220-240V).
Consumption
0.9A max.
0.04A (standby)
Communication
Simultaneous with handset
Calling
Call button on door station or Monitor button on room monitor station activates door camera, and projects
infrared up to 50 cm (20") on MY-CA.
Call tone
Electronic chime tone, 4-stroke, adjustable
Video monitor
Scanning line
Dimensions (H x W x D)
Weight:
4" direct view flat CRT
525 lines
210 x 186 x 57.5 (mm). 8-1/4" x 7-5/16" x 2-1/4".
1,1 OOg (2.43 lbs.) approx.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful inteference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician
for help.
4*
Aiphone warrants its products to be free from defects of material and workmanship under normal use and service for a period of one
^
year after delivery to the ultimate user and wilt repair free of charge or replace at no charge, should it become defective upon which
examination shall disclose to be defective and under warranty. Aiphone reserves unto itself the sole right to make the final decision
^
whether there is a defect in materials and/or workmanship; and whether or not the product is within the warranty.
This warranty shall not apply to any Aiphone product which has been subject to misuse, neglect, accident, or to use in violation of
*
instructions furnished, nor extended to units which have been repaired or altered outside of the factory. This warranty does not cover
^
batteries or damage caused by batteries used in connection with the product.
4
*
This warranty covers bench repairs only, and any repairs must be made at the shop or place designated in writing by Aiphone.
*
Aiphone will not be responsible for any costs incurred involving on site service calls.
•4*
4- 4* 4- 4*4*4*4*4*4*4* 4*4* 4*4* 4-4* 4*4* 4*4*4*4*4*4*4*4*4-4*4*4*4*4- 4*4- 4*4- 4*4* 4*4*4*4*4*4*4*4*4*4*4*4*4*4*4*4*4*4*4*4*4*4*4*4
Aiphone Co., Ltd., Nagoya, Japan
Aiphone Corporation, Bellevue,
SNA,
USA
MY-1 CD-I(E)0994K
COMMUNICATION SYSTEMS
© AIPHONE
HOME, BUSINESS, INDUSTRY.
Printed in Japan (E)
-
6
-
Advertisement
