Tronic TWC 3A1 Operation And Safety Notes page 38

2. Plug the USB adapter (not included) into an easily
accessible mains socket.
3. LED indicator
when the product is under standby mode and there is no
mobile device on the Qi charging surface
4. Place the mobile device on the Qi charging surface
Make sure the center of the device is aligned over the center
of the Qi charging surface. Charging will begin on contact.
The LED indicator
on Qi charging surface
will light up blue for approx. two seconds
4
lights up blue when charging is active
4
3 .
3 .
.
3
GB/IE
39