ABB Ekip Touch Operating Instructions Manual page 9

P R OT E C T I O N S E T T I N G S S E T U P F O R E K I P TO U C H T R I P U N I T S
Step 7. Press the Threshold I1 row
Step 8. This display is presented (In order to change settings, a password is required).
Default Password: 00001. Zero appears in the first PIN box.
Press Confirm to accept zero
Repeat for the next three PIN boxes
On the 5th PIN box change from zero to one (press the up triangle), then press Confirm
This will allow Protection Settings to be changed per the coordination study.
Note: Once the PIN code has been entered, all displays can be browsed for two minutes: once two minutes has elapsed, the PIN code must be entered
again (depending on the case in question).
9
7
8