Track Play - Roland TR-909 Owner's Manual

MEN СО
4. Track Play (Playing Rhythm Track)
[Operation]
(D Select the Track to be played simply
by pressing a relevant Track Selector
Button. Here, the first measure of the
Track will be automatically ready to
be played.
*Selecting an empty Track will cause
the Display to show O.
MEAS/TEMPO
* Cycle Play
Pressing the Cycle Key will turn The
TR-909 to the Cycle mode (the indi-
cator lights up), so the Track will play
repeatedly until you press the Stop/
Continue Key or the Cycle Button
again. Pressing the Stop/Continue will
immediately stop the Rhythm, but if
the Cycle Key is pressed, the Rhythm
will stop at the end of the music. Also,
you can turn this Cycle Play function
on even during Rhythm play.
"жТгаск Play from the set measure
It is possible to start playing the Rhy-
thm from any measure you like. While
holding the Shift Button down, set the
measure number where you wish the
Rhythm to start by using the Main
Keys, and hit the Enter Key. Then press
the Stop/Continue Key, and the Rhy-
thm will start from the beginning of the
set measure. Here, if you, by mistake,
press the Start Key instead of the Start/
Continue Key, normal Rhythm play
(starting from the first measure) will
follow. Please be carefull.
* Tempo Display
Pressing the Tempo Button will cause
the Display Window to show the tempo
of the current Rhythm.
MEAS/TEMPO
*Real Time Playing along with the Track
playing
It is possible to play each sound source
by tapping the Main Keys during Track
play. So you can enjoy real time play
along with the Track play.
*See P. 34 for Rhythm Sync.
g
a
"ERE
5)
à
о~9)
Measure
Number
о~9)
ЕМТЕК
жч © ~
{
2
Б)
&
51