Dell Alienware m18 R2 Owner's Manual page 111

Table 39. System setup options—Update,Recovery menu (continued)
Update,Recovery
BIOS Downgrade
Allow BIOS Downgrade
SupportAssist OS Recovery
BIOSConnect
BIOSConnect
Dell Auto OS Recovery Threshold
Dell Auto OS Recovery Threshold
Table 40. System setup options—System Management menu
System Management
Service Tag
Asset Tag
AC Behavior
Wake on AC
Wake on LAN
Wake on LAN
Auto On Time
Auto On Time
DIagnostics
OS Agent Requests
Power-on Self-Test Attomatic Recovery
Power-on Self-Test Automatic Recovery
the event of EC corruption, ME corruption, or a hardware issue. The recovery
image must exist on an unencrypted partition on the drive.
Controls flashing of the computer firmware to previous revisions.
By default, the Allow BIOS Downgrade option is enabled.
Enables or disables the boot flow for SupportAssist OS Recovery tool, in the event
of certain system error.
By default, the SupportAssist OS Recovery option is enabled.
Enables or disables cloud Service OS recovery if the main OS fails to boot within
the number of failures equal or greater than the value specified by Dell Auto OS
Recovery Threshold, and local Service does not boot, or is not installed.
By default, the BIOSConnect option is enabled.
Allows you to controls the automatic boot flow for SupportAssist System
Resolution Console and for Dell operating system Recovery tool.
By default, Dell Auto OS Recovery Threshold option is set to 2.
Displays the Service Tag of the computer.
Creates a system Asset Tag that can be used by an IT administrator to uniquely
identify a particular system.
NOTE: Once set in the BIOS, the Asset Tag cannot be changed.
Enables or disables the computer to turn on and go to boot when AC power is
supplied to the computer.
By default, the Wake on AC option is disabled.
Enables of disables the computer to turn on by a special LAN signal.
By default, Disabled option is selected.
Enable to set the computer to turn on automatically every day or on a preselected
date and time. This option can be configured only if the Auto On Time is set to
Everyday, Weekdays, or Selected Days.
By default, Disabled option is selected.
Enables the user to configure the Ownership date.
By default, the OS Agent Requests option is disabled.
Enables or disables the computer to respond before completing the BIOS Power-
on Self-Test (POST).
111