Dell Alienware m18 R2 Owner's Manual page 105

Table 33. System setup options—Storage menu (continued)
Storage
Enable MediaCard
Secure Digital (SD) Card
Secure Digital (SD) Card Read-Only Mode Enables or disables the Secure Digital (SD) Card Read-Only Mode.
Table 34. System setup options—Display menu
Display
Display Brightness
Brightness on battery power
Brightness on AC power
Full Screen Logo
Full Screen Logo
Hybrid Graphics / Advanced Optimus
Enable Hybrid Graphics/Advanced
Optimus (when available)
Table 35. System setup options—Connection menu
Connection
Network Controller Configuration
Integrated NIC
Wireless Device Enable
WLAN
Bluetooth
Enable UEFI Network Stack
Enable UEFI Network Stack
Enables or disables the Secure Digital (SD) Card.
By default, Secure Digital (SD) Card option is selected.
By default, Secure Digital (SD) Card Read-Only Mode option is not selected.
Enables to set the screen brightness when the computer is running on battery
power.
By default, the screen brightness is set to 50 when the computer is running on
battery power.
Enables to set the screen brightness when the computer is running on AC power.
By default, the screen brightness is set to 100 when the computer is running on
AC power.
Enables or disables the computer to display a full-screen logo, if the image
matches screen resolution.
By default, the Full Screen Logo option is disabled.
When turned on, the computer allows both integrated and discrete graphics
controllers to work together for optimized capability and battery life. When
turned off, the discrete graphics controller will drive all displays to prioritize
graphics capability over battery life.
By default, the Enable Hybrid Graphics/Advanced Optimus (when available)
option is enabled.
NOTE: Linux is not supported with Hybrid Graphics enabled.
Controls the onboard LAN controller.
By default, Enabled with PXE option is selected.
Enable or disable internal WLAN devices.
By default, WLAN option is selected.
Enable or disable internal Bluetooth devices.
By default, Bluetooth option is selected.
Enables or disables the UEFI Network Stack and controls the onboard LAN
Controller.
105