Locating Tension Pole - JVC GR-DVL355EG Service Manual

2.6.2 Locating tension pole

<PLAY mode>
Locating procedure
1. Enter the mechanism assembly into the PLAY mode.
(Refer to "2.3.2 Explanation of mechanism mode".)
2. When the " " part is positioned down, make sure
that the part "a" of the tension arm assembly is located
within the range of "b".
3. If the part "a" is out of the range, turn the pin "c" to
adjust the position.
b
c
a
Fig. 2-6-2
2-17