Table of Contents
Advertisement
3. 3a Tension arm assembly/ 3b Release guide assembly
3b Idler arm assembly/ 3d Guide arm assembly
3c Pinch roller arm assembly
(W3a)
3a
3b
Note 3a
(W3b)
Note 3b
Fig. 2-4-7
4. 4a Cleaner arm assembly/ 4b Slant pole arm assembly
4b Drum assembly
7
(S4)
9
(S4)
4c
Fig. 2-4-8
3d
Note 3a
3c
(W3a)
3e
8
(S4)
4a
(L4a)
(W4)
Note 4a
Note 4b
4b
(P4b)
(P4a)
(L4b)
Note 3a:
When removing the reel cover assembly, pay heed to re-
lease guide assembly and guide arm assembly. For, the
guide arm assembly is just inserted into the slide deck as-
sembly from the upside and it is apt to come off after the
reel cover assembly is removed.
Note 3b:
Reassemble the tension arm assembly to the mechanism
as the pad arm assembly is moved to the extent in the di-
rection of the arrow.
Note 4a:
When removing the cleaner arm assembly, it is recom-
mended to remove the slant pole arm assembly together
with it except the case of a single unit replacement, because
the hook (L4a) is hard to disengage.
Note 4b:
How to set the coil spring (P4b).
(P4b)
4b
4a
(P4b)
2-9
Advertisement
Table of Contents
