To change the displayed frequency
step, press STEP until the desired step
appears. (The frequency step flashes
anytime it is different from the preset
frequency step.)
To change a displayed frequency step
back to its preset value, press RESET.
Notes:
• You cannot change the frequency
step unless it appears on the dis¬
play.
• Keep
in
mind
that
improperly
changing the frequency step can
cause you to miss stations while
scanning. For example, if you use a
50 kHz frequency step to search for
broadcasts, and the band mode is
set to NFM, you might miss fre¬
quencies
between
the
50
kHz
steps.
36