Advertisement
&
'
2
4
q
{
3
i
i
i
i
Cautions
Keep away
from florescent lamps, neon lamps,
and others which may cause noises. When noises
are generated, change the direction of guitar to
reduce noises.
Set the amp volume to OFF when connecting and
disconnecting
the power
cord
and
connection
cord, or the speaker
may
be damaged. When
connecting instrument to the amp, first plug the
cord in the instrument, and then plug into the
amp. When disconnecting, first un-plug the cord
from the amp, and then the one from the instru-
ment.
Do not give shocks to the amp, since it comprises
precision components. And be sure not to transp-
ort the amp while the power switch is ON.
Avoid use in hot and humid places. Periodically
clean away dirt and dust.
Clean the leather on the amp with natural liquid
detergent or rubber eraser. Avoid thinner or other
organic solvents.
When
replacing fuse, use the one specified by
Roland.
JC-60 SPECIFICATIONS
Inputs
Controls
Foot Switch Jacks
Output Jacks
Semiconductors
Output Power:
Power
Consumption:
Speaker:
Dimensions:
Weight:
Accessory
Vibrato Speed
Vibrato Depth
Chorus/Vibrato
Changeover Switch
Power Switch
For Chorus/Vibrato
For Reverb
For EXT. Speaker
(8 ohms)
Line Out
Transistors
Zener Diodes
Dual FET
60W (R.M.S.)
200VA
30cm x 1
600(W) x 255(D) x 480(H)mm
23.6" x 10" x 19"
20 Kgs (44 lbs.)
Vinyl Cover
* Specifications are subject to change without notice.
=
Roland
Printed in Japan '75, SEP. F-2
Advertisement
